Application of High Temperature Teflon Belt on Garment Printing Machine

Teflon conveyor belts are mainly divided into two categories: seamless connected teflon belts and mesh teflon belts. Teflon mesh conveyor belt not only has the characteristics of high temperature resistance and non-stickiness, but also has many meshes on the surface, so the air permeability is excellent. Therefore, many garment industries use High Temperature Teflon Belt on the printing machine.

Jiujiang PTFE specializes in the production of Teflon products, and has developed cost-effective High Temperature Teflon Belt for garment industry.

Common printing machines, dyeing and finishing machines, printing and dyeing dryers, shrinking machines and other equipment can be equipped with our High Temperature Teflon Belt. The following describes how to install the teflon mesh conveyor belt on the printing machine.

Put on the flexible rotating air shaft on the teflon belt winding core, and set the belt roll up. Before putting it on the shelf, make sure that the direction of the upper and lower cover glue is not reversed. In the workplace where it is not suitable to be put on the shelf, the Teflon mesh belt roll can be guided away, and the folding part of the teflon mesh conveyor belt has a large enough radius of curvature. In order to prevent damage to the Teflon mesh belt, it is forbidden to place heavy objects on the Teflon mesh belt at the fold. To replace the Teflon mesh belt, the new belt and the old belt can be connected together, and the unloading and installation of the new Teflon mesh belt are carried out at the same time.

For the horizontally running non-woven printing machine, the old non-woven printing machine can be cut off at any point.

For non-woven printing machines operating in an oblique direction, the cutting point must be selected to prevent losing control due to its own weight.

After setting the position of the new belt on the non-woven printing machine, fix one end of the tape with a clamp, and then connect it with the rope that goes around the roller and the pulley, and use the traction device to balance the Teflon mesh belt on the textile printing machine, prevent the Teflon mesh belt and the frame from squeezing each other when pulling.

Fix one end of the Teflon mesh belt on the non-woven printing frame with a clamp, and pull the other end tightly with the pulley until the Teflon mesh belt does not sag significantly on the return roller.

Correct and standardized installation standards can not only ensure the smooth progress of installation, but also increase the speed of installation. Each factory should provide complete operating standards when producing.

Please contact us infocorefrp@gmail.com for free samples of Teflon conveyor belts to learn more about the applications of Teflon conveyor belts.

Share This Story, Choose Your Platform!