Installation and debugging of Teflon conveyor belt on conveyor

Teflon conveyor belts are high temperature resistant and food-grade materials, which are used on many conveyors. By installing a Teflon conveyor belt, the conveyor can continuously carry various items on a certain line, with low operating costs and a wide range of applications. The installation and debugging of Teflon conveyor belt on the conveyor should pay attention to the following details.

When the manufacturer delivers, the Teflon conveyor belt is generally rolled, with a paper tube as the core, and the Teflon conveyor belt is wound on the paper tube. In order to prevent the Teflon conveyor belt from being damaged during transportation, it is usually shipped in a box or fixed by a shelf. When receiving the goods, especially when unpacking, pay attention to avoid bumping.

As a supplier of Teflon conveyor belts in the European market, we have many Teflon conveyor belts sent to Europe. Usually we will pack the belts in wooden box, and then arrive at the customer’s port by sea.

Remove the packaging of the Teflon conveyor belt and check carefully for abnormal damage, after confirming that it is correct, you can use the air expansion shaft to insert it into the paper tube, different lengths of Teflon conveyor belts use different diameters of paper tubes, when using the air expansion shaft, pay attention to the size to avoid damaging the paper tube or the air expansion shaft.

We provide multiple specifications of winding paper tubes for Teflon conveyor belts. If you have special size requirements, you can contact us for customization.

After the air expansion shaft is fixed, use a lifting tool to place the Teflon conveyor belt on the workbench. Installation can be carried out after the conveyor is stopped. The equipment must be fixed during installation, and expansion bolts can be used. The Teflon conveyor belt and the conveyor should be kept level, and the center line can be drawn according to the drawing to ensure the coincidence and the flexible movement of various moving parts. When the installation is completed, the site needs to be cleaned to avoid damage to the Teflon conveyor belt caused by foreign objects.

After the installation is completed, the conveyor is debugged. When debugging, each single device can be manually tested and combined to debug and use to see if it can meet the action requirements. Before commissioning, fill the reducer and moving parts with corresponding lubricating oil. In order to make the equipment have good performance and achieve the designed function and state, debugging the electrical part of the Teflon conveyor belt includes the debugging of conventional electrical wiring and actions.

Contact our engineer at [email protected] for help on the installation and use of the Teflon conveyor belt. We provide free samples of the Teflon conveyor belt.

Share This Story, Choose Your Platform!