Some customers have responded to us before, there was slippage when using the Teflon conveyor belt. Our customers asked us what to do to avoid this situation.

Our engineers immediately analyzed and discussed after receiving feedback from customers.

Generally speaking, the slippage refers to the fact that the conveyor speed is less than 95% of the roller speed, which is the slippage that the customers react to us.

Finally, we conclude that the friction between the roller and the Teflon conveyor belt is insufficient, which causes the Teflon conveyor belt to slip during operation.

There are many reasons for the insufficient friction between the roller and the Teflon conveyor belt, such as insufficient tension, load start, and insufficient friction coefficient of the roller surface.
The reasons for insufficient tension are: insufficient stroke tension, insufficient counterweight, and too long conveyor belt.
The reasons for the insufficient friction coefficient of the roller surface are: abrasion of the roller surface is too much, the belt is too wet or lub. Oil on the surface.

According to the solution provided by our engineers, the customers solved the problem of slipping quickly.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *